• System Performance

  • American

  • Metric

  • Sine Force
  • 8,800 lbf
  • 4,000 kgf
  • Random Force
  • 8,800 lbf
  • 4,000 kgf
  • Shock Force (6ms)
  • 17,600 lbf
  • 8,000 kgf
  • Useful Frequency Range
  • DC to 2,500 Hz
  • DC to 2,500 Hz
  • Continuous Displacement
  • 3.5 in
  • 90 mm
  • Shock Displacement
  • 4.0 in
  • 100 mm
  • Max Velocity
  • 5.9 ft/s
  • 1.8 m/s
  • Max Acceleration (sine)
  • 100 g
  • 981 m/s²

Shaker - LS Series

  • Armature Diameter
  • 14.5 in
  • 370 mm
  • Armature Material
  • Aluminum (A)
  • Aluminum (A)
  • Effective Armature Mass
  • 81.4 lb
  • 37 kg
  • Load Attachment Points
  • 1/2 in : 3/8 in UNC
  • M10
  • Armature Insert Pattern (PCD)
  • 8 on 6.0 in; 8 on 12.0 in
  • 8 on 150 mm; 8 on 300 mm
  • First Resonant Frequency ¡À5%, bare table
  • 2,100 Hz
  • 2,100 Hz
  • Max Static Payload
  • 1100 lb
  • 500 kg
  • Natural frequency thrust axis
  • < 5 Hz
  • < 5 Hz
  • Stray Flux Density
  • < 10 gauss
  • < 10 gauss

Shaker - Unibase - BT Series

  • Slip Plate Working Surface
  • 39.3 x 39.3 in
  • 1000 x 1000 mm
  • Slip Plate Material
  • Magnesium (M)
  • Magnesium (M)
  • Slip Plate Thickness
  • 1.96 in
  • 50 mm
  • Slip Plate Grid plus amature insert pattern
  • 4 in grid
  • 100 mm grid
  • Usable Frequency
  • 2000 Hz
  • 2000 Hz
  • Slip Plate Mass
  • 220 lb
  • 100 kg
  • Max Payload
  • 17,600 lb
  • 8,000 kg
  • Driver Bar Weight including bolts
  • 17.6 lb
  • 8.0 kg
  • Number of Hyrostatic Bearings
  • 2
  • 2
  • Mass per Hydrostatic Bearing
  • 10.6 lb
  • 4.8 kg
  • Overturning Moment Pitch
  • 54,354 lbft
  • 73,069 Nm
  • Overturning Moment Roll
  • 44,900 lbft
  • 60,876 Nm
  • Overturning Moment Yaw
  • 38,972 lbft
  • 52,837 Nm
  • Dimensions uncrated (W x D x H)
  • 92.3 x 56 x 45.6 in
  • 2345 x 1510 x 1160 mm
  • Unibase shaker weight uncrated
  • 11814 lb
  • 5370 kg

Power Amplifier - MPA400 Series

  • Amplifier Series/Model Number
  • MPA409
  • MPA409
  • Number of sub-modules supplied
  • 9
  • 9
  • Rated Power Output
  • 40 kVA
  • 40 kVA
  • Rated Output Voltage
  • 120 V rms
  • 120 V rms
  • Rated Output Current
  • 333 A rms
  • 333 A rms
  • Number of Cabinets
  • 1
  • 1
  • Dimensions uncrated (W x D x H)
  • 21.6 x 31.5 x 72.8 in
  • 550 x 800 x 1850 mm
  • Amplifier weight uncrated
  • 1365 lb
  • 620 kg
Amplifiers are designed with a conservative performance margin please refer to amplifier page for maximum ratings.

Blower

  • Power Output
  • 15 kW
  • 15 kW
  • Blower Model Number
  • HP4
  • HP4
  • Standard Air Hose Length
  • 19.7 ft
  • 6 meter
  • Hose Diameter
  • 8 in
  • 200 mm
  • Dimensions including silencer (W x D x H)
  • 41.8x35.5x74.0 in
  • 1061x902x1880 mm
  • Blower weight uncrated
  • 770 lb
  • 350 kg

BT1000M

The BT Series design provides a high over-turning moment and cross-axial restraint. This concept combines a standard slip table assembly with 3,000 psi hydrostatic bearings to provide high dynamic moment restraint while preserving the damping characteristics of an oil film. This system allows testing of heavy products with high centers gravity by reacting moments through the hydrostatic bearings. Cross-axis motion is constrained and is typically less than 10% of input at frequencies up to 2000 Hz. except at resonance. Additional hydrostatic bearings can be supplied to provide extra restraint when testing parameters require a higher overturning moment.

The BT Series Hydrostatic Slip Tables can be configured to any size or shape and are available with any ETS Unibase shaker and as a stand-alone product for any existing single and multi-shaker installation.

  • Large and heavy product testing with high center of gravity
  • Hydrostatic journal bearings restrain high pitch, roll and yaw moments
  • Light weight magnesium slip plate
  • Pressure interlock and personel safety devices
  • Reservoir oil filter

SHAKER OPTIONS & ACCESSORIES

We understand that test requirements constantly change and equipment must be versatile in its application. That is why the engineers at ETS Solutions offer such a wide choice of options and accessories. We are here to help and respond to a customers needs.

  • Load attachment inserts with Metric and American threads
  • PCD insert patterns to match existing jigs and fixtures
  • Armature frames in Magnesium or Aluminium
  • Motorized Shaker Body Rotation System
  • Enclosed Air Inlet and Outlet Ducts
  • Air Isolation Mounts
  • Air Glide Casters
  • Unibase Slip Tables
  • Standalone Slip Tables
  • Slip Tables to any Size and Shape
  • Additional BT Series journal bearings
  • Thermal Barriers for use with Climatic Chambers
  • Slip Plates in Magnesium or Aluminium
  • Gun Drilled Slip Plates for low temperature applications
  • Head Expanders and Vertical Support Platforms
  • Customized Fixtures -Cube, L type and T type
  • Auxiliary Interlock Unit for additional safety Interlock
  • Remote Control Panel via RS485 data communication